Quality EDM, Inc. History

Quality EDM, Inc. was founded in 1993 in Yorba Linda, CA by Mr. Michael Gervais, who has a long history of Electrical Discharge Machining (EDM) experience, and has established one of the largest EDM shops in Orange County.

Starting with only three EDM machines, Quality EDM, Inc. has grown to 20 wire and sinker EDM machines with complete machines shop services. Quality EDM, Inc. has grown to become one of the most prominent EDM shops in Southern California servicing the commercial and aerospace industry. Quality EDM, Inc. takes pride in its quality ratings and on time deliveries.

Boeing North American (formerly Rockwell International Corporation)

• A0103-016 Rev B (dated 08-10-84) Electrical Discharge Machining Of Metallic Parts
• BAC 5969 Rev D (dated 07-01-88) Electrical Discharge Machining

Raytheon Aircraft Montek

• 940004-001 Rev F1 (dated 08-31-94) Electrical Discharge Machining (EDM) of Aluminum, Steel, and Stainless Steel.

Parker Hannifin Corporation

• MIL-I-45208 A Inspection System
  
• ES3-14 Rev E (dated 04-17-91) Electrical Discharge Machining (EDM) and Electro Chemical Machining (ECM)
  
• ES3-17 Rev D (dated 04-05-93) Engineering Specification Electrical Discharge Machining (Wire EDM)
  
• ES5-126 Rev N/C (dated 02-08-94) Engineering Specification Electrical Discharge Machining (EDM)
  
• ES5-125 Rev N/C (dated 02-08-94) Engineering Specification Electrical Discharge Machining Wire (EDM)
  
• BPS 4706 Rev J (dated 03/14/91) Electrical Discharge Machining

H R Textron

• ESS 008-2 Rev F (dated 10-19-98) Electrical Discharge Machining

Dowty Aerospace Los Angeles

• 9U9090 Rev F (dated 10-19-89) Electrical Discharge Machining

Vickers, Inc.

• PQR-1 Section 2 Electrical Discharge Machining

Kaiser Marquardt

• Electrical Discharge Machining

ITT Cannon

• Electrical Discharge Machining